dmesg - darktable gtx 1070
Linux version 4.8.13-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbecffff] usable
BIOS-e820: [mem 0x00000000bbed0000-0x00000000bc349fff] reserved
BIOS-e820: [mem 0x00000000bc34a000-0x00000000bc457fff] ACPI data
BIOS-e820: [mem 0x00000000bc458000-0x00000000bc680fff] ACPI NVS
BIOS-e820: [mem 0x00000000bc681000-0x00000000bd716fff] reserved
BIOS-e820: [mem 0x00000000bd717000-0x00000000bd717fff] usable
BIOS-e820: [mem 0x00000000bd718000-0x00000000bd79dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd79e000-0x00000000bdbd8fff] usable
BIOS-e820: [mem 0x00000000bdbd9000-0x00000000bdff3fff] reserved
BIOS-e820: [mem 0x00000000bdff4000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P9X79 DELUXE, BIOS 4701 05/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFFC0000000 write-back
2 base 0000BF000000 mask 3FFFFF000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8800000fd940]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d4d000, 0x01d4dfff] PGTABLE
BRK [0x01d4e000, 0x01d4efff] PGTABLE
BRK [0x01d4f000, 0x01d4ffff] PGTABLE
BRK [0x01d50000, 0x01d50fff] PGTABLE
BRK [0x01d51000, 0x01d51fff] PGTABLE
BRK [0x01d52000, 0x01d52fff] PGTABLE
RAMDISK: [mem 0x372a2000-0x37948fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BC380078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BC38A250 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BC380170 00A0DD (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 0x00000000BC678080 000040
ACPI: APIC 0x00000000BC38A360 0000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BC38A428 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BC38A470 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BC38A4B0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: DMAR 0x00000000BC4576A0 0000BC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: SSDT 0x00000000BC38A540 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: BGRT 0x00000000BC457668 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
NODE_DATA(0) allocated [mem 0x43fff9000-0x43fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bbecffff]
node 0: [mem 0x00000000bd717000-0x00000000bd717fff]
node 0: [mem 0x00000000bd79e000-0x00000000bdbd8fff]
node 0: [mem 0x00000000bdff4000-0x00000000bdffffff]
node 0: [mem 0x0000000100000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
On node 0 totalpages: 4178613
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11981 pages used for memmap
DMA32 zone: 766744 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbbed0000-0xbc349fff]
PM: Registered nosave memory: [mem 0xbc34a000-0xbc457fff]
PM: Registered nosave memory: [mem 0xbc458000-0xbc680fff]
PM: Registered nosave memory: [mem 0xbc681000-0xbd716fff]
PM: Registered nosave memory: [mem 0xbd718000-0xbd79dfff]
PM: Registered nosave memory: [mem 0xbdbd9000-0xbdff3fff]
PM: Registered nosave memory: [mem 0xbe000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbe000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88043fc00000 s103128 r8192 d32040 u262144
pcpu-alloc: s103128 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113299
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16364316K/16714452K available (6131K kernel code, 1051K rwdata, 1912K rodata, 1256K init, 1036K bss, 350136K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:896 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4319.959 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8643.91 BogoMIPS (lpj=14399863)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c42000 - ffffffff81c48000)
ftrace: allocating 24335 entries in 96 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bc320000 end: 0x000000bc32cfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (69157.31 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbc458000-0xbc680fff] (2265088 bytes)
PM: Registering ACPI NVS region [mem 0xbd718000-0xbd79dfff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:03:09, date: 01/09/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb72a000-0xfb72afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb729000-0xfb72900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb700000-0xfb71ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb728000-0xfb728fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb727000-0xfb7273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb720000-0xfb723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb726000-0xfb7263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb725000-0xfb7257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb724000-0xfb7240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:03:04.0: [13f6:8788] type 00 class 0x040100
pci 0000:03:04.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:04.0: supports D1 D2
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:04:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:04:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:04:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.2: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb600000-0xfb607fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfb500000-0xfb507fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0a:00.0: [168c:002b] type 00 class 0x028000
pci 0000:0a:00.0: reg 0x10: [mem 0xfb300000-0xfb30ffff 64bit]
pci 0000:0a:00.0: supports D1
pci 0000:0a:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0b:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:0b:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:0b:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:0b:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:0b:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfb200000-0xfb2001ff]
pci 0000:00:1c.4: PCI bridge to [bus 0b]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0c:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:0c:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:0c:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0c]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:0d:00.0: [1b4b:9130] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x10: [io 0xa040-0xa047]
pci 0000:0d:00.0: reg 0x14: [io 0xa030-0xa033]
pci 0000:0d:00.0: reg 0x18: [io 0xa020-0xa027]
pci 0000:0d:00.0: reg 0x1c: [io 0xa010-0xa013]
pci 0000:0d:00.0: reg 0x20: [io 0xa000-0xa00f]
pci 0000:0d:00.0: reg 0x24: [mem 0xfb110000-0xfb1107ff]
pci 0000:0d:00.0: reg 0x30: [mem 0xfb100000-0xfb10ffff pref]
pci 0000:0d:00.0: Enabling fixed DMA alias to 00.1
pci 0000:0d:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0d]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: EC stopped
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
ACPI : EC: EC started
vgaarb: setting as boot device: PCI:0000:04:00.0
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbed0000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd718000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdbd9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 05]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:03.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.2: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0b]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0c]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 0d]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:08: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0a: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0b: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0c: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0c: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0d: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0e: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0e: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0e: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0e: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0e: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:07:00.0: xHCI HW did not halt within 16000 usec status = 0x10
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6812K (ffff8800372a2000 - ffff880037949000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb7ed0000-0xbbed0000] (64MB) mapped at [ffff8800b7ed0000-ffff8800bbecffff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001e00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 1:386:95
rtc_cmos 00:03: setting system clock to 2017-01-09 21:03:10 UTC (1483995790)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1256K (ffffffff81b08000 - ffffffff81c42000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 2044K (ffff880001601000 - ffff880001800000)
Freeing unused kernel memory: 136K (ffff8800019de000 - ffff880001a00000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
VFIO - User Level meta-driver version: 0.3
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
vfio-pci: probe of 0000:04:00.0 failed with error -22
vfio_pci: add [10de:1b81[ffff:ffff]] class 0x000000/00000000
vfio-pci: probe of 0000:04:00.0 failed with error -22
vfio-pci: probe of 0000:04:00.1 failed with error -22
vfio_pci: add [10de:10f0[ffff:ffff]] class 0x000000/00000000
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=58)
Initialized host personality
SCSI subsystem initialized
VMware PVSCSI driver - version 1.0.6.0-k
NET: Registered protocol family 40
vmmon: loading out-of-tree module taints kernel.
/dev/vmmon[96]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[96]: Using tsc_khz as TSC frequency: 4319959
/dev/vmmon[96]: Module vmmon: initialized
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb727000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.0: Host not halted after 16000 microseconds.
xhci_hcd 0000:07:00.0: can't setup: -110
xhci_hcd 0000:07:00.0: USB bus 2 deregistered
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
xhci_hcd 0000:07:00.0: init 0000:07:00.0 fail, -110
xhci_hcd: probe of 0000:07:00.0 failed with error -110
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb726000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725300 irq 27
ata6: DUMMY
ahci 0000:0b:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0b:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200100 irq 28
ata8: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200180 irq 28
ahci 0000:0d:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq pio
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
ata9: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110100 irq 29
ata10: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110180 irq 29
ata11: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110200 irq 29
ata12: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110280 irq 29
ata13: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110300 irq 29
ata14: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110380 irq 29
ata15: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110400 irq 29
ata16: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110480 irq 29
xhci_hcd 0000:08:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:09:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata4.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata4.00: disabling queued TRIM support
ata4.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata5.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
ata3.00: ATA-8: WDC WD4001FAEX-00MJRA0, 01.01L01, max UDMA/133
ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata2.00: ATA-8: WDC WD6000HLHX-01JJPV0, 04.05G04, max UDMA/133
ata2.00: 1172123568 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata9: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi 1:0:0:0: Direct-Access ATA WDC WD6000HLHX-0 5G04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: new full-speed USB device number 2 using xhci_hcd
sd 1:0:0:0: [sdb] 1172123568 512-byte logical blocks: (600 GB/559 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD4001FAEX-0 1L01 PQ: 0 ANSI: 5
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
usb-storage 6-2:1.0: USB Mass Storage device detected
scsi host16: usb-storage 6-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: fast init done
sdb: [LDM] sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 4:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4 sde5
sd 4:0:0:0: [sde] Attached SCSI disk
usb 2-1.2: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 4319.869 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3e44b4d7a1b, max_idle_ns: 440795346885 ns
usb 3-2: new low-speed USB device number 3 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1E7D:2E22.0001/input/input2
ata8: SATA link down (SStatus 0 SControl 300)
scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
koneplus 0003:1E7D:2E22.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone XTD] on usb-0000:00:1d.0-1.2/input0
input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1E7D:2E22.0002/input/input3
usb 2-1.3: new full-speed USB device number 4 using ehci-pci
koneplus 0003:1E7D:2E22.0002: input,hidraw1: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone XTD] on usb-0000:00:1d.0-1.2/input1
EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.3: config 1 has an invalid interface number: 3 but max is 2
usb 2-1.3: config 1 has an invalid interface number: 3 but max is 2
usb 2-1.3: config 1 has an invalid interface number: 3 but max is 2
usb 2-1.3: config 1 has an invalid interface number: 3 but max is 2
usb 2-1.3: config 1 has no interface number 2
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 2-1.4: new high-speed USB device number 5 using ehci-pci
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Login Prompts.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
EXT4-fs (sde4): re-mounted. Opts: discard
usbip_core: USB/IP Core v1.0.0
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 2-1.5: new full-speed USB device number 6 using ehci-pci
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
systemd-journald[266]: Received request to flush runtime journal from PID 1
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8169 0000:0c:00.0 eth0: RTL8168evl/8111evl at 0xffffc900000fc000, 54:04:a6:35:8a:f2, XID 0c900800 IRQ 46
r8169 0000:0c:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PC Speaker as /devices/platform/pcspkr/input/input7
[drm] Initialized drm 1.1.0 20060810
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-2/3-2:1.0/0003:04D9:1818.0003/input/input8
ath: phy0: Set BT/WLAN RX diversity capability
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
Adding 2097148k swap on /dev/sde3. Priority:-1 extents:1 across:2097148k SSFS
scsi 16:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5
scsi 16:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5
sd 16:0:0:0: [sdf] Attached SCSI removable disk
sd 16:0:0:1: [sdg] Attached SCSI removable disk
intel_rapl: Found RAPL domain package
iTCO_vendor_support: vendor-support=0
intel_rapl: Found RAPL domain core
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
r8169 0000:0c:00.0 enp12s0: renamed from eth0
asus_wmi: Initialization: 0x0
usbcore: registered new interface driver snd-usb-audio
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
usb 2-1.8: new full-speed USB device number 7 using ehci-pci
random: crng init done
hid-generic 0003:04D9:1818.0003: input,hidraw2: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:08:00.0-2/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-2/3-2:1.1/0003:04D9:1818.0004/input/input10
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
EXT4-fs (sde2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sde2): mounted filesystem without journal. Opts: (null)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001c80000, irq=19
ath9k 0000:0a:00.0 wlp10s0: renamed from wlan0
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: discard
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hid-generic 0003:04D9:1818.0004: input,hidraw3: USB HID v1.10 Device [USB Keyboard] on usb-0000:08:00.0-2/input1
asus_wmi: Number of fans: 1
input: FiiO FiiO USB DAC-E17 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1852:50D0.0005/input/input11
hid-generic 0003:1852:50D0.0005: input,hidraw4: USB HID v1.00 Device [FiiO FiiO USB DAC-E17] on usb-0000:00:1d.0-1.3/input0
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 (using threaded interrupts)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
XFS (sde1): Mounting V5 Filesystem
hid-generic 0003:1B1C:1C0B.0006: hiddev0,hidraw5: USB HID v1.11 Device [ ] on usb-0000:00:1d.0-1.8/input0
usbcore: registered new device driver usbip-host
usbip_host: USB/IP Host Driver v1.0.0
XFS (sde1): Ending clean mount
vboxdrv: Found 8 processor cores
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
mousedev: PS/2 mouse device common for all mice
vboxdrv: TSC mode is Invariant, tentative frequency 4319852264 Hz
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:35:8a:a4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
snd_hda_intel 0000:04:00.1: Disabling MSI
snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
e1000e 0000:00:19.0 eno1: renamed from eth0
snd_hda_codec_realtek hdaudioC3D0: autoconfig for ALC898: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC3D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC3D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC3D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC3D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC3D0: inputs:
snd_hda_codec_realtek hdaudioC3D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC3D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC3D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card3/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card3/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card3/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card3/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card3/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card3/input17
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card3/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card3/input19
clocksource: Switched to clocksource tsc
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.2/0000:04:00.1/sound/card4/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.2/0000:04:00.1/sound/card4/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.2/0000:04:00.1/sound/card4/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.2/0000:04:00.1/sound/card4/input23
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
r8169 0000:0c:00.0 enp12s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-e8330cab-5e60-0c8e-5c63-556e39eb83e6) @ PCI:0000:04:00.0
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 3
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 57
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 8
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 9
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
e1000e 0000:00:19.0 eno1: changing MTU from 1500 to 1450
Bluetooth: Can't change to loading configuration err
ath3k: probe of 2-1.5:1.0 failed with error -110
usbcore: registered new interface driver ath3k
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
snd_hda_intel 0000:04:00.1: IRQ timing workaround is activated for card #4. Suggest a bigger bdl_pos_adj.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj.
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 1
snd_hda_codec_hdmi hdaudioC4D0: HDMI: invalid ELD data byte 1
fuse init (API version 7.25)
usb 3-1: USB disconnect, device number 2
usb 3-1: new full-speed USB device number 4 using xhci_hcd